AG Zolid FX Multilayer (SHT)
$189.00 – $239.00
Zolid FX Multilayer is a polychromatic, super high translucent zirconia with integrated shade and translucency gradient. Smooth shade transitions simulate tooth enamel, dentine and cervical shades in a naturally fluent progression without disruptive shade edges.
- Flexural strength 700 Mpa
- Super high translucency
Zolid FX Multilayer – Beauty inclusive
With its integrated shade and translucency gradient, the Zolid FX Multilayer zirconia offers maximum esthetics without requiring reworking.
Zolid FX Multilayer is a poly- chromatic, super-high translu- cent zirconia with integrated shade and translucency gradi- ent. Smooth shade transitions simulate tooth enamel, dentin and cervical shades in a natu- rally fluent progression without disruptive shade edges. The tooth-like preshading allows efficient, economical process- ing without the staining pro- cedure.
- Fully anatomical crowns and bridges (max. 3 units extending to the molar region)
- Veneers, inlays, onlays
- Continuous shade and translucency gradient for smooth shade transitions without shade edges, and natural aesthetics
- High bending strength in comparison with glass-ceramics enables fabrication of up to 3-unit bridges, including in the molar region
- Intelligent nesting concept guarantees accurate matching of the VITA shades and economic working in the lab
Technical data
Magnification Factor
To compensate for volume shrinkage during the sintering process, Ceramill restorations made of zirconium oxide and Sintron are always fabricated with a certain allowance. This is defined by entering the so-called magnification factor in the CAM software.
There are various CAM software systems on the market, all of which require different values to be entered. To meet the various requirements, the Ceramill blanks are marked with the following three specifications for the magnification factor:
Sintering of Zolid restoration
Sintering of zirconium oxide is one of the most important process steps in the fabrication of dental restorations.
The porous white body condenses under the influence of high temperatures and the blank achieves its final mechanical (strength) and optical (translucency) properties. The standardized as well as material friendly sintering temperature of 1450 °C ensures economical processes. This allows ZI, Zolid, Zolid HT+ or Zolid FX to be sintered together in a single furnace run.
Optimum results are achieved with the Ceramill Therm and Therm S high-temperature furnaces from Amann Girrbach. These are fully matched to the Zolid portfolio and thus achieve the best possible material properties.
| Shade | 0/A1, A2/A3, A3.5/A4, 0/B1, B2/B3, B3/B4, C1/C2, C3/C4, D2/D3, D3/D4 |
|---|---|
| Thickness | 14mm, 16mm, 20mm |
Be the first to review “AG Zolid FX Multilayer (SHT)”
Related products
AG zolid zirconia disc
Milling
Milling
AG zolid zirconia disc
Reviews
There are no reviews yet.